Points To Consider When Choosing LED Strip


In a previous editorial we focused on the most important things to look for when buying LED strip for the first time. Now we 'all take you through the next phase installation. Installing your LED strips can be something very simple to very difficult, but ultimately it depends on what end consequence you are trying to get with your lighting system. For example, the introduction of a 1 meter strip of fluorescent lighting in your kitchen cabinet can be much simpler than using 20 meters of RGB LED Strip Lights to equip a club and run it on DMX. No matter what you do there are some universal things to look for and this article will take you through some of them.

We'll start with the LED strip itself. This is a long piece of high-impact, versatile circuit card with surface mounted devices or SMD, positioned along its length. There are a few different things to consider here, including LEDs per meter, the size of the LED chip, color strip light and length. Strip Lights are available in two varieties LEDs per meter, 30 LEDs per meter and 60 LEDs per meter. As the name implies it has twice as many LEDs and which is much brighter than the first. Click here to know more.

They are designed to be used in lighting where they are forced to compete with background lighting context. For example if you want to use in a framework of daylight, as a display street store, or add to a room that already has general lighting and want them to be seen again, you should opt for 60 LED per meter their sharpest light output makes them suitable for these purposes. Apart from this 30 LEDs per meter strip will be able to treat most other configurations such as Club or wherever else they do not have to compete with background lighting provisions.

When you look at the specifications of the strip lighting you will usually notice a series of four numbers that most people might not mean much. The latter refers to the size of the individual LED on the tape. In general, you find the size of chips is 5050 (5 mm by 5 mm) or 3528 (3.5 mm by 2.8 mm). The main difference between these two types of chip size is the coherence of the light they produce. Small LEDs create a more jagged and inconsistent effect, while large LEDs provide a more uniform light distribution. you'll be able to go online to get the best deal. 

You Might Also Like